TS-Doctor 2.0 www.cypheros.de

Beiträge anzeigen

Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.


Nachrichten - latomus

Seiten: [1] 2
1
TS-Doctor 2.x / Re: some improvements in the UI?
« am: Februar 28, 2016, 16:35:03 »
Hi there,

Thank you so much...

Regarding 1. below, my request was based on the fact that spotting PIDs is the only way to make sure that you are suppressin the appropriate audio stream (after checking in the diting screen). Hence all my other requests...

Best regards

Pierre

2
TS-Doctor 2.x / some improvements in the UI?
« am: Februar 20, 2016, 14:19:21 »
Hello,

Congratulations and thank you for TS-DOCTOR V2. A real step ahead.

1. I have noticed that when you are in the main screen after opening a film, you have to click on the small arrow in the right part of the screen in order to unhide the PID number of the stream. This looks like an unnecessary step. Wouldn't it be possible to display this PID number rigth away?

2. When you are in the main screen after opening a film, and you clik on the symbol to reach the "stream properties" screen, I think that this is mostly because you would like to change the language and/or the stream order. However, the initial focus is put on the "OK" button and you have to press the "tab" key three time before reaching the field labeled "language". Would it be possible to put the initial focus on this very field? This would have the tremendous advantage of just pressing the first two letters of the language you would like to enter, rather than either pressing three time on the tab key, on using the mouse to click on this field.

3. Regarding PID numbers, those ones hidden in the main screen are expressed in DECIMAL numbering, but the same PID numbers in the editing screen (the one where you can cut parts of the movie) are expressed in HEXADECIMAL... This is quite boring. Would it be possible to have the same numbering scheme in both places?

4. In the screen for cutting parts of the film you are editing, there are 3 buttons (one for audio volume, another for selecting audio streams and the last one for selecting subtitles). When you click on the buttons for selecting audio streams or subtitles, there is an unexpanded combobox appearing just above the button you have just clicked. In this unexpanded combobox, there is only the first stream visible and you then have to click once again in the arrow of the combobox for having the other streams appear. This is an unnecessary step. I think that this combobox should be displayed in its expanded format rigth away, in order to not having to click several times for a very simple action.

Thank you very much in advance.

Good luck for the future of TS-DOCTOR!

P.

3
TS-Doctor 1.2 / Fluidity issues
« am: März 10, 2015, 22:20:36 »
Hi everybody;

I have been suffering for years and years a problem of fluidity of video rendering on my home setup. I suppose to a large extent that it is not connected with the quality of files produced by TS-DOCTOR. However, I am not in a position to completely disregard this assumption, hence this post here.

Linked to a visual experience, this kind of problem is difficult to explain with words and in particular in English…

I would explain it as follows. Let us take the example of a very simple video sequence, with a background that does not in change at all  for a long period of time and an object moving from the right to the left in front of this background. What I will see is sequence of images where individual images will be perfectly clear, but the moving object seems to move from the right-handed edge of the screen to the left in five/six stages. The global experience looks like there would be 5/6 fps rather than the usual 24, 25 of 30 fps.

My settop box is a CLARKETECH 6600SST. I do not experience this problem when I play back movies that have been recorded on the PVR. Then, the video motion is as fluid as it was on the original broadcasted stream.

Then, I select some movies of interest to me, use TS-DOCTOR for fixing the transmission errors and removing ads. Then, I store the fixed/edited movie on a QNAP NAS. All my home network devices are gigabyte Ethernet compliant and the throughput is excellent (400 Mbytes/sec between my NAS equipment and the place where the TV and additional networked video equipment are located).

My Networked Media Thank is a small, cheap A.C Ryan HD!Mini, connected through a HDMI cable to a SAMSUNG Television. When I use it for playing back videos stored on my QNAP NAS, I always experience the fluidity, smoothness issue described above.

Then I decided to test other setups. I tried to connect a PC to my SAMSUNG television (through an HDMI connection) and use VLC and other software video players. Same fluidity problems.

Then, trying for other ways to test this equipment and determine the reason of the problem, I remembered that my SAMSUNG television had a built-in facility to read video files located on networked devices. (to be frank, this functionality is rather poor since it does not read ISO files and the navigation tool is more than basic, in particular when it comes to deal with TS files).

Here, no problems of fluidity at all…

In conclusion, I am wondering where the problem lies. I assume that the built-in video rendering functionality of my television has been devised to cope with highly corrupted broadcasts and is therefore able to cope with desperate situations. However, it reads files that are supposed to have been fixed with TS-DOCTOR. Since the network throughput is excellent, I would rather conclude that the software based video readers used on my PC and/or the hardware based decoder of my A.C Ryan HD!Mini are not powerfull enough to cope with HD videos.

I would be grateful if you could share with me any ideas/assupmtions/suggestions in this respect.

Best regards

4
TS-Doctor 1.2 / Re: Language descriptors
« am: Dezember 06, 2014, 14:27:35 »
Thank you very much Cypheros for fixing this. It works perfectly now.

For the second question of the intial post, I would suggest an improvement in the user interface. Would it be possible to add, somewhere in the "settings/preferences/correction behaviour" menu a section below "default language" (eg called "most frequently used langauges") that would allow users to indicate 3 frequent languages of audio tacks (in case, I would like to indicate French, English and Romanian).

Additionally, would it be possible in the "stream properties" dialog box to have 3 radio buttons, labelled with the ISO codes of these three frquently used languages,  that would allow to indicate in just one click the language of the audio track in question. It would save a lot of time, since, currently, you have to click in the "language" combobox, type the first letters of the language and click in the list the language. As I have indicated in the initial post, if the audio track is in English, typing "EN" in the combobox box lead you to a language called "English-based (Other)", obliging you to scroll down further to find "English" with the appropriate ISO code.

Thanks a lot

Pierre M.

5
TS-Doctor 1.2 / Re: Non audio data exceeds 100 mb in audio wav dd 5.1
« am: Dezember 03, 2014, 21:48:23 »
I guess it's self expaining. Select TS Remuxer from the menu and then select the file you want to remux. In the TS Remuxer window, you can select the output format (TS,M2TS,MKV or MP4) and select or deselect the streams you want to have in your remuxed file
[attachimg=1]

If TS and M2TS is missing as an output format, you need to install TSRemuxer (Preferences/Settings/Supported Tools) or select the folder where TSMuxer can be found.

If MKV is missing, you need to install MKVToolnix (Preferences/Settings/Supported Tools);

Yes, you are right that it is totally self-explanatory. However, my question was more directed to your last comment " It has a special lipsync feature to keep AC3 and EAC3 audio in sync".

I did not find where to activate this nice option. Is it an automatic, built-in feature?

P.

6
TS-Doctor 1.2 / Re: Non audio data exceeds 100 mb in audio wav dd 5.1
« am: Dezember 02, 2014, 21:32:59 »
Hello,

Can I ask you if there is any good user guide for TS-REMUXER (and, in particular, within TS-DOCTOR)?

Thx

Pierre

7
Hello,

I have also observed the same behaviour where eac3to detects MP2 tracks as if thet were AC3 tracks.

I should add that the documentation available regarding this tool and all associated GUIs is rather poor, or too high-level for beginners like me...

It is a pitty, since, in France E-AC3+ is used by the main broadcasters and this format cannot be read by VLC (as well as many other useful tools)

P.

8
TS-Doctor 1.2 / Re: Language descriptors
« am: November 09, 2014, 12:28:17 »
FTP detail via PM??? what is PM? (sorry for stupid question... managed to find the ftp details where indiacated!)

9
TS-Doctor 1.2 / Re: Language descriptors
« am: November 08, 2014, 15:26:14 »
I have done so. Please find attached another log (corresponding to what TS-DOCTOR has found in the first file, here xxx.TRP)

I think that 50% of the problem is on my side. I have also a media center (a PC equipped with Seven 64 bits and a TV card from HAUPPAUGE). Here, the hard disk is formatted in NTFS and all recordings are captured in one big file.

When I open such recordings with TS-DOCTOR, I can see all the details of the video files and its tracks in TS-DOCTOR's main screen (once again, I cannot join BMP pictures). Here, I can see that the first audio track is labelled as (French), the second one as (Reserved) and the third one as (qad). We can therefore conclude that if the video file contains a description of the language of audio tracks, TS-DOCTOR will not override this information.

However, if I come back to recordings captured on my set top box (CLARKETECH 6600SST), you can see in the log attached that all audio streams are labelled "Ger", although my default language for audio tracks has been set to "French" in "preferences". I am more or less sure that my set top box does not capture the information about the language of audio tracks because, when I playback such file with  SMPlayer, and when in SMPlayer I try to select another audio track, I can just see numbers (I suppose PIDs) and not the name of any language of the available audio tracks! We can therefore conclude that these recordings do not contain any information connected to language of audio tracks and, subsequently, that, in such cases, TS-DOCTOR complements the missing information not with the name of the language selected as "default" in "preferences", but with "GERMAN"... with, in my humble opinion, 50% of the problem of TS-DOCTOR side.

This is just my understanding of the problem. If you see an easy solution, I will take it anyway!

Best regards

Pierre M.

PS Sorry, but I cannot join logfiles either. Your firewall is actually prohibiting this as well

Here is an extract of the log

------------------------
  Stream Type    : 27
  Description    : AVC video stream as defined in ITU-T Rec. H.264 | ISO/IEC 14496-10 Video
  Elementary PID : $023B
  ES Info Length : 12
  ES Info        : $28, $04, $64, $00, $29, $BF, $0A, $04, $65, $6E, $67, $00
  ES Info Text   : (_d_)¿__eng_

  Stream Type    : 129
  Description    : Private stream type Audio AC3 (AC3)
  Elementary PID : $023D
  ES Info Length : 12
  ES Info        : $05, $04, $41, $43, $2D, $33, $0A, $04, $67, $65, $72, $00
  ES Info Text   : __AC-3__ger_

  Stream Type    : 129
  Description    : Private stream type Audio AC3 (AC3)
  Elementary PID : $023C
  ES Info Length : 12
  ES Info        : $05, $04, $41, $43, $2D, $33, $0A, $04, $67, $65, $72, $00
  ES Info Text   : __AC-3__ger_

  Stream Type    : 129
  Description    : Private stream type Audio AC3 (AC3)
  Elementary PID : $0241
  ES Info Length : 12
  ES Info        : $05, $04, $41, $43, $2D, $33, $0A, $04, $67, $65, $72, $00
  ES Info Text   : __AC-3__ger_

  Stream Type    : 129
  Description    : Private stream type Audio AC3 (AC3)
  Elementary PID : $023E
  ES Info Length : 12
  ES Info        : $05, $04, $41, $43, $2D, $33, $0A, $04, $67, $65, $72, $00
  ES Info Text   : __AC-3__ger_

  Stream Type    : 6
  Description    : ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data (Subtitle)
  Elementary PID : $0240
  ES Info Length : 10
  ES Info        : $59, $08, $64, $65, $75, $10, $00, $01, $00, $01
  ES Info Text   : Y_deu_____

  Stream Type    : 6
  Description    : ITU-T Rec. H.222.0 | ISO/IEC 13818-1 PES packets containing private data (Subtitle)
  Elementary PID : $023F
  ES Info Length : 10
  ES Info        : $59, $08, $64, $65, $75, $10, $00, $01, $00, $01
  ES Info Text   : Y_deu_____

10
TS-Doctor 1.2 / Re: Language descriptors
« am: November 07, 2014, 14:21:43 »
Dear Cypheros,

Thank you very much for your help. If I understand you well, based on what you saw in the log.file, your conclusion is that these audio tracks are indeed labelled as "ger".

I have to perform additional testing, since the file from which the log has been taken is not the file that comes directly from my SettopBox, but from TS-DOCTOR : my settopbox is equipped with a hard disk formated in DOS and delivers movies in parts of about 2 gigs max, that I have to merge using the function "open multiple files". So, it is impossible for me to know what the content of the files produced by the set top box is.

Will  kep you informed

P.

11
TS-Doctor 1.2 / Re: Language descriptors
« am: November 04, 2014, 19:12:28 »
As a former IT professional, I cannot blame anyone for appying strict security policies. No worry!

However, I would like to know if you have an idea of the problem I am experiencing. French has been selected as default language, but I have still German as language of all audio tracks when I open a video file for repair and/or additional work in TS-DOCTOR...

Best

P.

12
TS-Doctor 1.2 / Re: Language descriptors
« am: November 03, 2014, 21:43:49 »
Dear Cypheros,

As indicated in the initial post, I had already changed the default language to French. So, I a ms tille wondering what I might have screwed up...


 (I would have like to attached a JPEG of the screen concerned, but I receive an error message saying "HTTP Error 403 Forbidden / You don't have permission to access /index.php?action=post2;start=0;board=7 on this server. Your computer may be infected with a virus or a trojan. The Firewall has determined that you: Hacking attempt has been blocked! If you get this message in error, please contact the ADM1N and provide the date and time of this message.")

I just had my Avira scan the wholesystem, but it did not discover any viruses or trojans... pfff!

Thx

Pierre M.

13
TS-Doctor 1.2 / Re: Language descriptors
« am: November 02, 2014, 14:18:36 »
Here we are!

14
TS-Doctor 1.2 / Re: Language descriptors
« am: November 02, 2014, 13:33:49 »
Hi Djfe,

There was obviously a misunderstanding about what I meant by "default language". Sorry for that.

What kind of log do you mean? The one produced when a new file is saved? Since I am a newbie here, could please me if there is any post in this forum explaining how to produce such logs and how to publish them onto the forum?

Thx a lot

Pierre M.

15
TS-Doctor 1.2 / Re: Language descriptors
« am: November 01, 2014, 22:27:24 »
Thank you very much for your detailed explanations.

As indicated in the first part of my initial post, I already set "French" as default language... Hence my questions.

Best

P.


Seiten: [1] 2

www.cypheros.de